Do you live in an area where there are plenty of insects around? Thermal foggers might just be the solution to your problem. These are basically devices that are used to terminate pest problems in an outdoor area. kadıköy bayan escort
As its name implies, a thermal fogger makes use of thermal power in the form of heat to vaporize fogging solution, which is most of the time insecticides. The solution is then sprayed as a mist or fog. Thermal foggers can produce very tiny particles, between 0.5 to 5 microns. In addition, these particles can stay in the air for a long period of time until they finally settle on the ground.
güngören bayan escort
Table of Contents
There are many thermal foggers on the market. One of the most sought tools is the Burgess 982 electric professional thermal fogger. Today, we are going to look at its features, advantages, and disadvantages.
The Burgess 982 thermal fogger is one of the professional grade foggers that will help eliminate almost any type of insects. This is commonly used for fire and flood recovery as well as for getting rid of insects and other mildew odor.
This insect killer machine can work as a low volume fogger and as a mister by removing its heating elements. This means it can be used both indoors and outdoors. It is capable of eliminating unpleasant odors and mold as well as unwanted insects.
Unfortunately, only professionals can handle this machine well. Therefore, it is important that you carefully go through the manual and read the instructions. Make sure you do not use any wet powders too to avoid damage to the unit and nozzle. Keep this machine dry at all times also.
- Thermostatically controlled heating chamber
- Adjustable flow rate for a wetter or dryer fog
- Can be used as a fogger or mister
- Capable of producing microscopic particles (down to ~15 microns)
- Multi-jet nozzles for the tightest cracks and crevices
- Made in the USA
Pros and Cons
- Spun aluminum container
- Ideal for flood and fire recovery
- Effectively eliminates pet or mildew odor as well as mosquitoes and pests for up to 6 hours
- Easy to use; just plug in, and it will heat up after a few minutes
- Can be used for professional cleaning jobs
- Quickly fogs large outdoor areas (5,000 square foot yards in less than 10 minutes)
- Detachable heating element for electric spraying capability
- Little leaks have been reported
- Electric cable cord too short for a large outdoor area
The Burgess 982 thermal electric fogger may look familiar to some, as its design is similar to the famous Burgess Propane Fogger. Its body frame is made of plastic. You can find a metal tank where fogging solutions are filled just below the body. The container is large enough to store up to 3 liters of insecticides and get over 3 hours of operation with one tank.
You can find a handle at the top part of the body, making this a portable device. It has a flow adjustment knob that lets you regulate the flow rate of the fogging solution. This fogger can produce an average of 15-micron diameter particles. Simply turn the valve clockwise if you want the machine to produce a dry fog. Particles are smaller with a diameter of 5 to 20 microns.
Thermostatically Controlled Heating Chamber
Heating takes place in the heat assembly. This barrel-looking part can be found on the front area. As mentioned earlier, this is detachable, allowing the fogger to be used as a mister for indoor use.
At the back part is where the electric cable is located. It only runs between 1 and 2 feet long, which is too short for a large outdoor area.
This fogger uses electricity to heat the heating chamber. Give the heating barrel a couple of minutes to heat up before you start to fog. Otherwise, the fogging solution will only drip out of the nozzle. Also, wait for a couple of seconds before fogging triggers so the same temperature level can be attained. Meanwhile, just remove the heating assembly if you want to use this device indoors. gaziosmanpaşa bayan escort
For effective thermal fogging, make sure to use specially formulated thermal fogging products. Oil- and water-based solutions with propylene glycol oils are highly recommended.
The Burgess 982 fogger has a dimension of 12.8 x 12.5 x 8.8 inches. It weighs 5.7 pounds. You can easily carry this around when used.
Overall, the Burgess 982 professional thermal fogger is designed for both residential and commercial applications. It is made from high-quality materials to ensure durability even on the harshest working condition. It also uses the same effective system utilized by professionals.
A final tip: Make sure to keep the fogger 10 feet away from the area being treated. Also, let the fog drift in the desired direction. This distance allows non-vaporized particles to settle to the ground. eyüpsultan bayan escort